SEAT Automobiles Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
1,723 Posts
Discussion Starter · #1 ·
Brembos in Stock now at last!
I now have 3 FULL sets of Brembos brake upgrades in stock. Ibiza Cupra-R factory fitment, suits most Ibiza's, Mk2 Golfs, Corrado's etc.

Brakes are 4-pot Brembos, c/w all mechanical fixings required and instructions for fitment. 305x28mm disks.

Needs minimum wheel dimension of 7x16 ET35 with minimum of 38mm clearance between wheel hub face and rear of wheel spokes. (Ibiza Cupra-R wheels are OZ 7x16 ET35 for ref)

Price is now £450inc VAT plus carriage (29Kg package)

email me for more info at [email protected]

regards
Bill

__________________
 

·
Registered
Joined
·
69,316 Posts
I'm struggling to keep the cheque book in my draw....

If I did this it would be a lot more expensive that £450!
I would need new corners and doing that before decorating the lounge would involve a devorce so that could loose the house and the car anyway....

hmmm...
 

·
Registered
Joined
·
1,723 Posts
Discussion Starter · #4 ·
Originally posted by Stuart
Do you know if the standard 5 spoke Cupra 16" alloys have enough clearance?
I am afriad they don't, not by a long way either which surprised me :(

I run 7x16 Speedlines in ET38 (thanks Petrolhead Paul :)) and these clear by 0.75mm

Ibiza-R runs 7x16 ET35 OZ's as a guide.

regards
Bill
 

·
Registered
Joined
·
45 Posts
Do you really mean 0.75mm? ie. LESS than one millimeter!!!! Thats close!!!!

Can't wait to pick mine up on Sunday Bill. Just got to think of an excuse for the girlfriend now!!! :confused:

Ben
 

·
Registered
Joined
·
1,723 Posts
Discussion Starter · #6 ·
Originally posted by BenS1
Do you really mean 0.75mm? ie. LESS than one millimeter!!!! Thats close!!!!

Can't wait to pick mine up on Sunday Bill. Just got to think of an excuse for the girlfriend now!!! :confused:

Ben
Yep! 0.75mm, 3/4 of a millimeter. You did read right!
Mighty close but misses.... Running +5mm spacers though "just in case" and to allow for heat expansion and wheel distortion on cornering etc.... Don't want to skag the nice red paint. :p

regards
Bill
 

·
Registered
Joined
·
1,723 Posts
Discussion Starter · #7 ·
The Brembo sets I have are now all sold.
More on order, and orders are being secured on a first come first served basis, by placing orders.

New hoses are single line hoses, in Aeroquip Braided Stainless Steel lines for info.

regards
Bill
 
1 - 7 of 7 Posts
Top