SEAT Automobiles Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter · #1 ·
Can anyone advise me as to the best way to seperate the blade half of my new flip key. Does it slide off or pull off? I have removed the badge and taken out the screw. As it is a new key I do not want to butcher it, but need to fit my transponder. I would be grateful for any help guys.
 

·
Registered
Joined
·
39 Posts
OK try this:

flip the blade out, and underneath it you should see a small slot. Stick a small screwdriver in there (wrap it with tape if you are worried about marking it) and twist it a litlte to pop the 2 halves apart.
Hope this helps!
 
1 - 3 of 3 Posts
Top