SEAT Automobiles Forum banner
1 - 11 of 11 Posts

·
Registered
Joined
·
1,723 Posts
B&M short shifters from Autotechnik can fit the 02A and 02J g'boxes.
Variable % reductions on them.

complete gear lever assemblies in machined Aluminium.

Autotechnik are contactable on 02380 666200 if you wanted more info and prices etc..

Bill
 

·
Registered
Joined
·
1,723 Posts
Originally posted by Steve
Do these fit the ibiza Bill?
I think they said they did.
Best bet is to give them a call. (02380 666200 and speak to Ness or Alan)

20VT ones being 02J g'boxes, and earlier 16 models being 02A g'boxes.

Early ones were Rod change, and I know Autotechnik have done rod change shortshifts for approx £15 exchange or something.

regards
Bill
 
G

·
wee man have a rod achange box with short shift from autotecnik as bill says.
it can be adjusted to 30 or 50 % reduction works a treat on mine
020 rod change box
 

·
Registered
Joined
·
2,822 Posts
Im gonna sound really thick but what part is the gear rod is that the actual metal bar the gear k n o b screws onto?
 

·
Registered
Joined
·
1,723 Posts
Originally posted by Wee man
Im gonna sound really thick but what part is the gear rod is that the actual metal bar the gear k n o b screws onto?
The rod change is the part which connects the bottom of the gear lever to the gear box, as opposed cables (x2)

If you look in your engine bay for the geat linkage you would see a straight rod down by the steering rack if Rod change, or 2 cables attached to the top of the g'box mechanism if cable change.

regards
Bill
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top